Process Equipment

Heat Exchangers

Heat Exchangers are devices designed to transfer heat between two fluids—either liquids, vapours, or gases—without mixing them. They play a crucial role in heating, cooling, condensation, evaporation, and energy recovery processes.

The most common industrial type is the Shell & Tube Heat Exchanger, available in Mild Steel (MS) for general industrial use and Stainless Steel (SS304/316/316L) for corrosive or sanitary applications.

Applications:

Chemical plants, pharma processes, petrochemicals, HVAC chillers, condensers, reboilers, oil coolers, dye/paint plants, food & beverage.

A. Shell & Tube Heat Exchanger – Technical Specification

Parameter	Specification
Type	Shell & Tube design (fixed tube sheet / floating head / U-tube)
Material of Construction (Shell)	MS IS 2062 / SS304 / SS316
Material of Tubes	SS304/316/316L, Copper, Cu-Ni, Titanium (as required)
Tube Diameter	12.7 mm, 16 mm, or as per design
Tube Thickness (BWG)	14–20 BWG depending on duty
Tube Layout	Triangular / Square pitch
Design Pressure	3–10 kg/cm² (higher available on request)
Design Temperature	-20°C to 300°C (depending on material)
Shell Side Fluid	Hot or cold fluid (as per application)
Tube Side Fluid	Hot or cold fluid (as per requirement)
End Connections	Flanged / threaded / nozzle type

B. MS Heat Exchanger – Technical Specification

Parameter	Typical Specification
Shell Material	MS IS 2062
Tube Material	MS / CS / Copper / SS (optional)
Finish	External red oxide primer + enamel/PU paint
Corrosion Protection	Epoxy lining (optional for corrosive service)

C. SS Heat Exchanger – Technical Specification (SS304 / SS316 / SS316L)

Parameter	Typical Specification
Shell Material	SS304 / SS316
Tube Material	SS304 / SS316 / SS316L
Surface Finish	Internal & external buffed finish
Sanitary Design	Tri-clamp/TC connections (pharma/food)

A. Shell & Tube Heat Exchanger – Technical Specification

Parameter	Specification
Type	Shell & Tube design (fixed tube sheet / floating head / U-tube)
Material of Construction (Shell)	MS IS 2062 / SS304 / SS316
Material of Tubes	SS304/316/316L, Copper, Cu-Ni, Titanium (as required)
Tube Diameter	12.7 mm, 16 mm, or as per design
Tube Thickness (BWG)	14–20 BWG depending on duty
Tube Layout	Triangular / Square pitch
Design Pressure	3–10 kg/cm² (higher available on request)
Design Temperature	-20°C to 300°C (depending on material)
Shell Side Fluid	Hot or cold fluid (as per application)
Tube Side Fluid	Hot or cold fluid (as per requirement)
End Connections	Flanged / threaded / nozzle type

B. MS Heat Exchanger – Technical Specification

Parameter	Typical Specification
Shell Material	MS IS 2062
Tube Material	MS / CS / Copper / SS (optional)
Finish	External red oxide primer + enamel/PU paint
Corrosion Protection	Epoxy lining (optional for corrosive service)

C. SS Heat Exchanger – Technical Specification (SS304 / SS316 / SS316L)

Parameter	Typical Specification
Shell Material	SS304 / SS316
Tube Material	SS304 / SS316 / SS316L
Surface Finish	Internal & external buffed finish
Sanitary Design	Tri-clamp/TC connections (pharma/food)

Robust industrial construction
Low maintenance
Energy efficient

Applications and industry use-cases for this product are described here.

Heat Exchangers

You May Also Like

Reactors (MS/SS)

Receivers

Storage Tanks

Static Equipment