Process Equipment

Receivers

Receivers are storage or collection vessels used for holding, transferring, or temporarily storing liquids, solvents, vapors, or process fluids. They are installed downstream or upstream of reactors, centrifuges, dryers, filters, distillation columns, and vacuum systems.
These vessels may be atmospheric or pressurized, and are available in MS, SS304, SS316, or other material grades depending on chemical compatibility.

Functions of Receivers:

Collect liquid or condensate from a process
Act as buffer/storage tanks
Maintain steady flow to pumps or downstream equipment
Handle vacuum or pressure conditions
Collect product during batch or continuous processing

A. MS Receiver – Technical Specification

Parameter	Typical Specification
Material of Construction	MS IS 2062 (Gr. A/B)
Capacity Range	50 L to 50 KL (custom-built)
Design Pressure	Atmospheric to 3–5 kg/cm²
Design Temperature	Up to 200°C
Internal Coating (optional)	Epoxy lining / rubber lining for corrosion resistance
Finish	External red oxide + enamel/PU paint
Nozzles	Manhole, inlet/outlet, drain, vent, level indicator, pressure/vacuum relief
Supports	MS legs, skirt, or saddle supports
Testing	Hydro test

B. SS Receiver – Technical Specification (SS304 / SS316 / SS316L)

Parameter	Typical Specification
Material of Construction	SS304, SS316, SS316L
Capacity Range	20 L to 40 KL
Design Pressure	Full vacuum to 6 kg/cm²
Design Temperature	-20°C to 250°C
Internal Finish	Mirror finish (Ra 0.4–0.8 µm) for pharma/food
External Finish	Matt / Mirror / Buffed finish
Nozzles	Inlet, outlet, dip pipe, vent filter, manway, sampling valve, pressure gauge
Supports	SS legs or skirt/saddle support
Insulation (optional)	Rockwool/ceramic wool + SS cladding
Testing	Hydro test, passivation, radiography (if required)
Standards	ASME, GMP, ISO

A. MS Receiver – Technical Specification

Parameter	Typical Specification
Material of Construction	MS IS 2062 (Gr. A/B)
Capacity Range	50 L to 50 KL (custom-built)
Design Pressure	Atmospheric to 3–5 kg/cm²
Design Temperature	Up to 200°C
Internal Coating (optional)	Epoxy lining / rubber lining for corrosion resistance
Finish	External red oxide + enamel/PU paint
Nozzles	Manhole, inlet/outlet, drain, vent, level indicator, pressure/vacuum relief
Supports	MS legs, skirt, or saddle supports
Testing	Hydro test

B. SS Receiver – Technical Specification (SS304 / SS316 / SS316L)

Parameter	Typical Specification
Material of Construction	SS304, SS316, SS316L
Capacity Range	20 L to 40 KL
Design Pressure	Full vacuum to 6 kg/cm²
Design Temperature	-20°C to 250°C
Internal Finish	Mirror finish (Ra 0.4–0.8 µm) for pharma/food
External Finish	Matt / Mirror / Buffed finish
Nozzles	Inlet, outlet, dip pipe, vent filter, manway, sampling valve, pressure gauge
Supports	SS legs or skirt/saddle support
Insulation (optional)	Rockwool/ceramic wool + SS cladding
Testing	Hydro test, passivation, radiography (if required)
Standards	ASME, GMP, ISO

Robust industrial construction
Low maintenance
Energy efficient

Applications and industry use-cases for this product are described here.

Receivers

You May Also Like

Reactors (MS/SS)

Storage Tanks

Heat Exchangers

Static Equipment